GLASS WORKING SUPPLIES & EQUIPMENT
1-800-821-8866
U Lathe 79 mm (3-1/8") Bore
Standard features include a rack and pinion firecarriage burner bracket and a lathe bed scale. The U lathe can be purchased with motorized firecarriage and tailstock: additional sheets for motorized versions are available upon request.
Price:
$24100.00
Qty:
Part Information:
Part No: U11

 

 U LATHE SPECIFICATIONS

The U Lathe has an infinitely variable "V" belt drive with the following features: spindle On/Off, speed and direction controls: tailstock spindle On/Off switch: jog switch for spindles; and sockets which allow connection of remote control devices for control of spindle On/Off and speed functions.

Standard features include a rack and pinion firecarriage burner bracket and a lathe bed scale. The U Lathe can be purchased with motorized firecarriage and tailstock; additional sheets for motorized versions are available upon request.

Accessories must be ordered separately. Additonal information on individual accessories which are listed can be obtained under each accessory's respective catalog listing. For information on burners and paddles, refer to the Burner section of the catalog.

 

 

 A =  Spindle bore diameter
 B = Maximum spindle nose to spindle nose distance
 D = Radial clearance above heat shield
 E = Radial clearance above T-slot firecarriage cover
 F = Length of spindle
 G = Firecarriage travel distance
 H = Overall height
 J = Overall length
 K = Overall width
 L = Weight / Shipping weight

 

 U077 LATHE Co-ax
A =  mm 79 Inches 3-1/8
B =
 mm  772 Inches 30-3/8
D =
 mm  149 Inches 5-7/8
E =
mm  113 Inches 4-7/16
F =
 mm  167 Inches 6-9/16
G =
 mm 635 Inches 25
H =
 mm  378 Inches 14-7/8
J =
mm  1359 Inches 53-1/2
K =
mm  403 Inches 15-7/8
L = 
mm  83/119 Inches 183/263
 Spindle speed range 10 to 300rpm. Electrical supply required 100-120V AC, 50-60 Hz single phase. "Note: Other electrical supplies can be accommodated at extra cost.

 

U Lathe 79 mm (3-1/8") Bore
 Part Number
 Power  A B
 D E
 List Price
U11-211 110/120V 50/60Hz  79 772  149 113 $24,100*
U11-221 220V 50/60Hz 79 772  149 113 $24,100* 
U11-231 240V 50/60 Hz 79 772 149  113  $24,100*  
*Pricing is for LATHE ONLY (no accessories). Prices checked on October 1, 2008 and are subject to change without notice!

 

 FIRECARRIAGE COVER OPTIONS
Part Number
 Description  Unit Price
9262 U Lathe Firecarriage with Rack & Pinion Burner Mount Assemble $1,905
9586 T-Slot Firecarriage Cover & Burner Mount $925
Lathes can be purchased with a T-Slot firecarriage cover. Prices checked on October 1, 2008 and are subject to change without notice!

 

 LATHE BENCH CONFIGURATIONS
The plumbed bench has a stainless steel top and a black backboard. It is equipped with manifolds for gas, air, and oxygen with separate cutoff valves for the lathe, the gas-oxygen hand torch and an air-gas annealing burner. The basic bench is not plumbed and has no backboard. 
Part Number  Description Unit Price
9044-03 U077 Plumbed Bench Mounted $4,900
9044-13  U077 Basic Bench Mounted $1,780 

 

U LATHE CHUCK OPTIONS
Chuck measurements listed below reflect their potential based on the dimensions of the U lathe. Maximum measurements for all chucks, regardless of the lathe on which they are used, are listed in section 3 of the Litton Engineering Catalog. For the following chucks: C=Clockwise Close, CC=Counter Clockwise Close.
 Part #
Description
Unit Price
9272 Drill Chuck, 1/32" - 1/2" $555
9423 Drill Chuck, 3/16" - 3/4" $890 
9431 Drill Chuck, 3/16" - 1-1/32" $1,100
90009-02 Scroll Chuck, 4" Bison, CCW Close $1,475
97121-02 Scroll Chuck, 32mm, CW Close $1,475
97122-02 Scroll Chuck, 32mm, CCW Close $1,475
97141-02 Scroll Chuck, 52mm, CW Close $2,600 
97142-02 Scroll Chuck, 52mm, CCW Close $2,600 
97023-02 Scroll Chuck, 80mm, CW Close $2,700 
97024-02 Scroll Chuck, 80mm, CCW Close $2,700 
9781-02 Air Actuated Chuck, 33mm  $3,080
9779-02 Air Actuated Chuck, 50mm $3,800 
9959 Planetary Chuck, UC 3-Jaw Chuck $2,300 
80481 Long Arm Rod Option $145
 9331 Outboard Spindle Nose $365
9458 Spindle Nose Adapter U Spindle to HSA Spindle $950 

 

 VALVE & FOOT PEDAL OPTIONS
 Part Number  Description  Unit Price
9051-02 Gas-Oxy Proportioner Valve, Installed $3,500 
9051 Gas-Oxy Proportioner Valve $2,500
9311-02 Foot Pedal Mechanism Installed (for 9051) $1,200
9311 Foot Pedal Mechanism (for 9051) $600 

 

DRAG BAR OPTIONS
Part Number Description Unit Price
9323-01 Drag Bar, U Lathe $3,900
9323-21 Drag Bar and Stemhead Actuating Mechanism Combined $4,100

 

 ADAPTORS
 Adaptors will adapt spindle nose of U Lathe to that of another lathe.
 9457  F Lathe  9450  HJ Lathe
 9458  HA Lathe  9449  EE Lathes

 

 MISCELLANEOUS ACCESSORIES
9298 Standard Faceplate, 1-1/4" - 16 threads per inch
9308 Optional faceplate, 1" - 16 threads per inch
9331  Outboard spindle nose adaptor 
9628-02 Swivel/Stop Mechanism
9805 Spindle hose nipple
2220 Spindle closure disc
9387 Guide bar & bracket
9323-01 Drag bar
9323-21 Drag bar & stemhead actuating mechanism combined
90066 Foot pedal Spindle On/Off Control
90067 Remote motor control, Speed On/Off
90068 Foot Pedal Spindle Speed Control
90052 Foot Pedal Power On/Off Switch

 

 SPECIAL ORDER ACCESSORIES
 COLLET SYSTEMS
 Redwood
9242 Unbored spindle nose collet
9826 Bored spindle nose collet, specify bore, 6mm - 70mm
9266 Collet protector disc faceplate
2610 Unbored protector disc
9802 Bored protector disc, specify bore, 89 mm max
9223 Spindle nose collet draw-in bar assembly
9232 Collet draw-in bar assembly for outboard spindle nose adaptor
1757 3" adaptor collet, unbored
9403 3" adaptor collet, specify bore, 25 mm - 73 mm
9408 3" adaptor assembly
9495 Hand wheel actuated 5C collet system
9633 Air actuated 5C collet system, headstock (9796 or 9797 required)
9634 Air actuated 5C collet system, tailstock (9796 or 9797 required)

 

STEMHEADS AND ACTUATING MECHANISM (headstock)
9982 2-jaw small
9983 3-jaw small
9984 4-jaw small
9991 2-jaw small
9992 3-jaw large
9362 Stemhead actuating mechanism (for use on headstock only)

 


 
powered by Zomix