| HSJ & HTJ LATHE SPECIFICATIONS |
The HSJ and HTJ Lathes have an infinitely variable "V" belt drive with the following features: spindle On/Off, speed and direction controls: tailstock spindle On/Off swithch: jog swithchfor spindles: and sockets which allow connection of remote control devices for control of spindle On/Off and speed functions. Lathe bed scales are also a standard feature. The HSJ and HTJ Lathes vary in radial clearance. Two bed lengths are available for each model (see specifications below). Lathes can be purchased with motorized firecarriage and tailstock: additional sheets for motoried versions are available upon request. Accessories must be ordered separately. Additional information on individual accessories which are listed can be obtained under each accessory's respective catalog listing. For information on burners and paddles, refer to the Burner section of the website. |
| A = Spindle bore diameter |
| B = Maximum spindle nose to spindle nose distance |
| D = Radial clearance above heat shield |
| E = Radial clearance above T-slot firecarriage cover |
| F = Length of spindle |
| G = Firecarriage travel distance |
| H = Overall height |
| J = Overall length |
| K = Overall width |
| L = Weight / Shipping weight |
| HSJA093 | ||||
| A = | mm | 67 | Inches | 2 5/8 |
| B = | mm | 927 | Inches | 36 1/2 |
| D = | mm | 232 | Inches | 9 1/8 |
| E = | mm | 190 | Inches | 7 1/2 |
| F = | mm | 238 | Inches | 9 3/8 |
| G = | mm | 737 | Inches | 29 |
| H = | mm | 520 | Inches | 20 1/2 |
| J = | mm | 1625 | Inches | 64 |
| K = | mm | 482 | Inches | 19 |
| L = | mm | 175/217 | Inches | 385/479 |
| Spindle speed range 20 to 400rpm. Electrical supply required 100-240V AC, 50-60 Hz single phase Voltage required must be specified at time of order | ||||
| A = Spindle Bore diameter |
| B = Maximum length (Spindle nose to spindle nose) |
| D = Radial clearance above heat shield |
| E = Radial clearance above T-slot FC |
| Dimensions in millimeters |
| HSJ LATHE 114mm (4-1/2") Bore | ||||||
| Part Number | Model Number | A | B | D | E | List Price |
| HJ11-211 | HSJ093 | 114 | 927 | 232 | 190 | $32,850* |
| HJ12-211 | HSJ143 | 114 | 1429 | 232 | 190 | $34,750* |
| HJ21-211 | HTJ093 | 114 | 927 | 350 | 308 | $37,400* |
| HJ22-211 | HTJ143 | 114 | 1429 | 350 | 308 | $40,650* |
| *Pricing is for raw lathe only (no accessories and/or options) All prices as of February 1, 2020 and are subject to change without notice! | ||||||
FIRECARRIAGE COVER and BURNER MOUNT OPTIONS (required) Lathes can be purchased with a standard firecarriage cover and standard burner mount or with a T-slot firecarriage cover and/or a rack and pinion burner mount. The desired configuration must be specified. Model numbers are listed below.
| ||
| Part Number | Description | Unit Price |
| 8983 | HS Lathe Firecarriage Assembly | $1,750 |
| 9674 | Standard Firecarriage Cover & Burner Mount | $375 |
| 9587 | T-Slot Firecarriage Cover & Burner Mount | $970 |
| 9366-01 | Rack & Pinion Burner Mount | $1,890 |
| 9366-11 | Rack & Pinon Burner Mount & T-Slot Firecarriage Cover | $2,700 |
| All prices as of February 1, 2020 and are subject to change without notice! | ||
LATHE BENCH OPTIONS The Plumbed bench has a stainless steel top and a black backboard. It is equipped with manifolds for gas, air and oxygen with separate cutoff valves for the lathe, the gas-oxygen hand torch and an air-gas annealing burner. The basic bench is not plumbed and has no backboard. | ||
| Part Number | Description | Unit Price |
| 9044-05 | HSJ093, HTJ093 Plumbed Bench Mounted | $5,600 |
| 9044-15 | HSJ093, HTJ093 Basic Bench Mounted | $2,100 |
| 9045-03 | HSJ143, HTJ143 Plumbed Bench Mounted | $6,000 |
| 9045-13 | HSJ143, HTJ143 Basic Bench Mounted | $2,800 |
| All prices as of February 1, 2020 and are subject to change without notice! | ||
HS LATHE CHUCK OPTIONS Chuck measurements listed below reflect their potential based on the dimensions of the F Lathe. Maximum measurements for all chucks, regardless of the lathe on which they are used, are listed in section 3 of the catalog. For the following chucks: C=Clockwise Close, CC=Counter Clockwise Close. | ||
| Part Number | Description | Unit Price |
| 9274 | 1/32" to 1/2" Drill Chuck | $745 |
| 9425 | 3/16" to 3/4" Drill Chuck | $1,200 |
| 9433 | 3/16" to 1-1/32" Drill Chuck | $1,395 |
| 90009-04 | 4" Bison Chuck, CCW | $1,700 |
| 97121-04 | Scroll Chuck 32 mm CW Close | $1,700 |
| 97122-04 | Scroll Chuck, 32 mm CCW Close | $1,700 |
| 97141-04 | Scroll Chuck, 52 mm CW Close | $2,700 |
| 97142-04 | Scroll Chuck, 52 mm CCW Close | $2,700 |
| 97023-04 | Scroll Chuck, 80 mm CW Close | $3,000 |
| 97024-04 | Scroll Chuck, 80 mm CCW Close | $3,000 |
| 97035-04 | Scroll Chuck, 114 mm CW Close | $4,100 |
| 97036-04 | Scroll Chuck, 114 mm CCW Close | $4,100 |
| 9781-04 | Air Actuated Chuck, 33 mm | $4,395 |
| 9779-04 | Air Actuated Chuck, 50 mm | $4,995 |
| 9899 | Planetary, UC 3-Jaw Chuck | $3,500 |
| 9962 | Planetary, EC 3-Jaw Chuck | $8,000 |
| 9969 | Planetary, HSJ 6-Jaw Chuck | $7,400 |
| 9894 | Guiding Chuck, HSJ | $2,530 |
| All prices as of February 1, 2020 and are subject to change without notice! | ||
VALVES AND FOOT PEDAL MECHANISMS Model numbers Listed in Red Text are for valves and foot pedal mechanisms which are installed to a bench, model numbers Listed in Black Text are for valves and foot pedal mechanisms which are not installed. | ||
Rotary Cock gas-oxy proportioner, volume control and spindle air control (foot pedal mechanism required) | ||
| Part Number | Description | Unit Price |
| 9051-03 | Gas Oxy Proportioner Valve, Installed (093) | $3,500 |
| 9051 | Gas Oxy Proportioner Valve for all bench models | $2,700 |
| 9311-02 | Foot Pedal Mechanism Installed (for 9051) | $1,300 |
| 9311 | Foot Pedal Mechanism (for 9051) | $700 |
| 9051-04 | Gas-Oxy Proportioner Valve, Installed (143) | $3,600 |
| Piston Type gas-oxy proportioner, volume control valve | ||
| Part Number | Description | Unit Price |
| 9059-01 | Small Proportioner Valve | N/A |
| 9059 | Small Proportioner Valve | N/A |
| 9060-01 | Large Proportioner Valve | N/A |
| 9060 | Large Proportioner Valve | N/A |
| Rotary cock spindle air and vacuum control valve | ||
| 9064 | Spindle control valve | N/A |
| 9061 | Spindle control valve | N/A |
| Foot pedal mechanisms for two preceding valves | ||
| 9393 | For both valves | N/A |
| 9394 | For proportioner valve only | N/A |
| 9395 | For spindle control valve only | N/A |
| 9318 | For both valves | N/A |
| 9320 | For proportioner valve only | N/A |
| 9321 | For spindle control valve only | N/A |
| All prices as of February 1, 2020 and are subject to change without notice! | ||
ADAPTORS will adapt spindle nose of JSA/HSJA Lathe to that of another lathe | |
| Part Number | Description |
| 9456 | F Lathe |
| 9445 | U Lathe |
| 9447 | HJ Lathe |
| 9446 | EE Lathe |
| 9448 | EA, K Lathes |
| MISCELLANEOUS ACCESSORIES | |
| Part Number | Description |
| 9299 | Standard/Stop Mechanism |
| 1686 | Spindle closure disc |
| 9325-51 | Drag bar for HSA093 |
| 9027-01 | Roller bearing gib specify front or rear |
| 90066 | Foot Pedal Spindle On/Off Control |
| 90068 | Foot Pedal Spindle Speed Control |
| 9309 | Optional faceplate, 1" - 16 Threads per inch |
| 9338 | Outboard spindle nose adaptor (special HSJ spindle nose to fit on rear of spindle) |
| 9805 | Spindle hose nipple |
| 9388 | Guide bar & bracket |
| 9325-01 | Drag bar for HSJA093 |
| 9029 | Felt way wipes, set of four |
| 90067 | Remote motor contro., Speed On/Off |
| 90052 | Foot Pedal Power On/Off Switch |
copyright © 2025