| U LATHE SPECIFICATIONS |
The U Lathe has an infinitely variable "V" belt drive with the following features: spindle On/Off, speed and direction controls: tailstock spindle On/Off switch: jog switch for spindles; and sockets which allow connection of remote control devices for control of spindle On/Off and speed functions. Standard features include a rack and pinion firecarriage burner bracket and a lathe bed scale. The U Lathe can be purchased with motorized firecarriage and tailstock; additional sheets for motorized versions are available upon request. Accessories must be ordered separately. Additonal information on individual accessories which are listed can be obtained under each accessory's respective catalog listing. For information on burners and paddles, refer to the Burner section of the catalog. |
| A = Spindle bore diameter |
| B = Maximum spindle nose to spindle nose distance |
| D = Radial clearance above heat shield |
| E = Radial clearance above T-slot firecarriage cover |
| F = Length of spindle |
| G = Firecarriage travel distance |
| H = Overall height |
| J = Overall length |
| K = Overall width |
| L = Weight / Shipping weight |
| U077 LATHE Co-ax | ||||
| A = | mm | 79 | Inches | 3-1/8 |
| B = | mm | 772 | Inches | 30-3/8 |
| D = | mm | 149 | Inches | 5-7/8 |
| E = | mm | 113 | Inches | 4-7/16 |
| F = | mm | 167 | Inches | 6-9/16 |
| G = | mm | 635 | Inches | 25 |
| H = | mm | 378 | Inches | 14-7/8 |
| J = | mm | 1359 | Inches | 53-1/2 |
| K = | mm | 403 | Inches | 15-7/8 |
| L = | mm | 83/119 | Inches | 183/263 |
| Spindle speed range 10 to 300rpm. Electrical supply required 100-120V AC, 50-60 Hz single phase. "Note: Other electrical supplies can be accommodated at extra cost. | ||||
| U Lathe 79 mm (3-1/8") Bore | ||||||
| Part Number | Power | A | B | D | E | List Price |
| U11-211 | 110/120V 50/60Hz | 79 | 772 | 149 | 113 | $24,100* |
| U11-221 | 220V 50/60Hz | 79 | 772 | 149 | 113 | $24,100* |
| U11-231 | 240V 50/60 Hz | 79 | 772 | 149 | 113 | $24,100* |
| *Pricing is for LATHE ONLY (no accessories). Prices checked on October 1, 2008 and are subject to change without notice! | ||||||
| FIRECARRIAGE COVER OPTIONS | ||
| Part Number | Description | Unit Price |
| 9262 | U Lathe Firecarriage with Rack & Pinion Burner Mount Assemble | $1,905 |
| 9586 | T-Slot Firecarriage Cover & Burner Mount | $925 |
| Lathes can be purchased with a T-Slot firecarriage cover. Prices checked on October 1, 2008 and are subject to change without notice! | ||
| LATHE BENCH CONFIGURATIONS | ||
| The plumbed bench has a stainless steel top and a black backboard. It is equipped with manifolds for gas, air, and oxygen with separate cutoff valves for the lathe, the gas-oxygen hand torch and an air-gas annealing burner. The basic bench is not plumbed and has no backboard. | ||
| Part Number | Description | Unit Price |
| 9044-03 | U077 Plumbed Bench Mounted | $4,900 |
| 9044-13 | U077 Basic Bench Mounted | $1,780 |
| U LATHE CHUCK OPTIONS | ||
| Chuck measurements listed below reflect their potential based on the dimensions of the U lathe. Maximum measurements for all chucks, regardless of the lathe on which they are used, are listed in section 3 of the Litton Engineering Catalog. For the following chucks: C=Clockwise Close, CC=Counter Clockwise Close. | ||
| Part # | Description | Unit Price |
| 9272 | Drill Chuck, 1/32" - 1/2" | $555 |
| 9423 | Drill Chuck, 3/16" - 3/4" | $890 |
| 9431 | Drill Chuck, 3/16" - 1-1/32" | $1,100 |
| 90009-02 | Scroll Chuck, 4" Bison, CCW Close | $1,475 |
| 97121-02 | Scroll Chuck, 32mm, CW Close | $1,475 |
| 97122-02 | Scroll Chuck, 32mm, CCW Close | $1,475 |
| 97141-02 | Scroll Chuck, 52mm, CW Close | $2,600 |
| 97142-02 | Scroll Chuck, 52mm, CCW Close | $2,600 |
| 97023-02 | Scroll Chuck, 80mm, CW Close | $2,700 |
| 97024-02 | Scroll Chuck, 80mm, CCW Close | $2,700 |
| 9781-02 | Air Actuated Chuck, 33mm | $3,080 |
| 9779-02 | Air Actuated Chuck, 50mm | $3,800 |
| 9959 | Planetary Chuck, UC 3-Jaw Chuck | $2,300 |
| 80481 | Long Arm Rod Option | $145 |
| 9331 | Outboard Spindle Nose | $365 |
| 9458 | Spindle Nose Adapter U Spindle to HSA Spindle | $950 |
| VALVE & FOOT PEDAL OPTIONS | ||
| Part Number | Description | Unit Price |
| 9051-02 | Gas-Oxy Proportioner Valve, Installed | $3,500 |
| 9051 | Gas-Oxy Proportioner Valve | $2,500 |
| 9311-02 | Foot Pedal Mechanism Installed (for 9051) | $1,200 |
| 9311 | Foot Pedal Mechanism (for 9051) | $600 |
| DRAG BAR OPTIONS | ||
| Part Number | Description | Unit Price |
| 9323-01 | Drag Bar, U Lathe | $3,900 |
| 9323-21 | Drag Bar and Stemhead Actuating Mechanism Combined | $4,100 |
| ADAPTORS | |||
| Adaptors will adapt spindle nose of U Lathe to that of another lathe. | |||
| 9457 | F Lathe | 9450 | HJ Lathe |
| 9458 | HA Lathe | 9449 | EE Lathes |
| MISCELLANEOUS ACCESSORIES | |
| 9298 | Standard Faceplate, 1-1/4" - 16 threads per inch |
| 9308 | Optional faceplate, 1" - 16 threads per inch |
| 9331 | Outboard spindle nose adaptor |
| 9628-02 | Swivel/Stop Mechanism |
| 9805 | Spindle hose nipple |
| 2220 | Spindle closure disc |
| 9387 | Guide bar & bracket |
| 9323-01 | Drag bar |
| 9323-21 | Drag bar & stemhead actuating mechanism combined |
| 90066 | Foot pedal Spindle On/Off Control |
| 90067 | Remote motor control, Speed On/Off |
| 90068 | Foot Pedal Spindle Speed Control |
| 90052 | Foot Pedal Power On/Off Switch |
| SPECIAL ORDER ACCESSORIES | |
| COLLET SYSTEMS | |
| Redwood | |
| 9242 | Unbored spindle nose collet |
| 9826 | Bored spindle nose collet, specify bore, 6mm - 70mm |
| 9266 | Collet protector disc faceplate |
| 2610 | Unbored protector disc |
| 9802 | Bored protector disc, specify bore, 89 mm max |
| 9223 | Spindle nose collet draw-in bar assembly |
| 9232 | Collet draw-in bar assembly for outboard spindle nose adaptor |
| 1757 | 3" adaptor collet, unbored |
| 9403 | 3" adaptor collet, specify bore, 25 mm - 73 mm |
| 9408 | 3" adaptor assembly |
| 9495 | Hand wheel actuated 5C collet system |
| 9633 | Air actuated 5C collet system, headstock (9796 or 9797 required) |
| 9634 | Air actuated 5C collet system, tailstock (9796 or 9797 required) |
| STEMHEADS AND ACTUATING MECHANISM (headstock) | |
| 9982 | 2-jaw small |
| 9983 | 3-jaw small |
| 9984 | 4-jaw small |
| 9991 | 2-jaw small |
| 9992 | 3-jaw large |
| 9362 | Stemhead actuating mechanism (for use on headstock only) |
copyright © 2025