| Drill Chucks |
| Three sizes of drill chucks are available ready for use with all models of Litton lathes. They come with a mounting wrench only, as hand rightening is sufficient when used with glass tubing. Churck iszes, capacities and model numbers are listed below. |
| Description |
| A= | Bore Diameter of Chuck |
| B= | Outer diameter of faceplate |
| C= | Diameter of chuck base |
| D= | Length of chuck with jaws closed |
| X= | The distance from end of the spindle to the face of the faceplate |
| DC1 | DC2 | DC3 | |
| Capacity | 1mm to 13mm | 5mm to 19mm | 5mm to 26mm |
| 1/32" to 1/2" | 3/16" to 3/4" | 3/16" to 1-1/32 | |
| A | 13mm | 20mm | 25.4mm |
| 2" | 2-3/4" | 3-1/16" | |
| C | 51mm | 70mm | 78mm |
| 2" | 2-3/4" | 3-1/16" | |
| D | 93mm | 126mm | 154mm |
| 3-9/16" | 4-7/8" | 5-15//16" |
| Faceplate Mounted Drill Chucks | ||||||||
| Lathe Model | F | U | HA | HJ/EJ | EE | EA,K | EB/KA | KB |
| DC1 | 9270 | 9272 | 9273 | 9274 | 9275 | 9276 | 9277 | 9527 |
| DC2 | 9421 | 9423 | 9424 | 9425 | 9426 | 9427 | 9428 | 9528 |
| DC3 | 9429 | 9431 | 9432 | 9433 | 9434 | 9435 | 9436 | 9529 |
| B | 81mm | 138mm | 138mm | 190mm | 184mm | 272mm | 307mm | 324mm |
| 3-3/16" | 5-7/16" | 5-7/16" | 7-1/2" | 7-1/4" | 10-3/4" | 12-1/16" | 12-3/4" | |
| X | 13.65mm | 10.16mm | 19.05mm | 15.01mm | 14.10mm | 13.34mm | 10.16mm | 26.67mm |
| .5375" | .400" | .750" | .591" | .555" | .525" | .400" | 1,050" | |
| Faceplate Mounting Screws and Wrenches | ||||||||
| Lathe Model | F | U | HA | HJ/EJ | EE | EA, K | EB,EA | KB |
| Mtg. screw | 7146 | 7148 | 7147 | 7147 | 7145 | 7145 | 7145 | 50069 |
| Wrenchg | 52045-187 | 52045-187 | 52045-187 | 5204-187 | 52045-250 | 52045-250 | 52045-250 | N/A |
copyright © 2025