| EJ LATHE SPECIFICATIONS |
|
Model EJ Lathes have an infinitely variable timing belt drive with the following features: SpindleOn/Off, speed and direction controls; jog switch for spindles; and sockets which allow connection of remote control devices for control of spindle On/Off and speed functions. An optional tailstock spindle On/Off feature (co-axial) is available for certain models indicated below. The co-as version of EJ202 is limitied to a maximum speed of 85RPM. The spindle bore diamerter of Model EJ Lathes is 114 mm. The six different models of EJ Lathes represent six different bed lengths. Lathes can be purchased with motorized firecarriage and tailstock; additional sheets for motorized versions are available upon request. Lathe bed scales are a standard feature. Accessories must be ordered separately. Additional information on individual accessories which are listed can be obtained under each accessory's respective catalog listing. For information on burners and paddles, refere to the Burner section of the the catalog. |
| A = Spindle bore diameter |
| B = Maximum spindle nose to spindle nose distance |
| D = Radial clearance above heat shield |
| E = Radial clearance above T-slot firecarriage cover |
| F = Length of spindle |
| G = Firecarriage travel distance |
| H = Overall height |
| I = Height-Floor to Ways |
| J = Overall Length |
| K = Overall Width |
| L = Weight/Shipping weight |
| M = Spindle Speed Range |
| EJ128 |
EJ174 |
EJ202 |
EJ230 | EJ258 |
EJ286 |
||
| A = | mm | 114 | 114 | 114 | 114 | 114 | 114 |
| B = | mm | 1281 | 738 | 2018 | 2297 | 2576 | 2856 |
| C = | mm | ||||||
| D = | mm | 349 | 349 | 349 | 349 | 349 | 349 |
| E = | mm | 295 | 295 | 295 | 295 | 295 | 295 |
| F = | mm | 291 | 291 | 291 | 291 | 291 | 291 |
| G = | mm | 914 | 1372 | 1652 | 1931 | 2210 | 2489 |
| H = | mm | 1248 | 1248 | 1248 | 1248 | 1248 | 1248 |
| I = | mm | 765 | 765 | 765 | 765 | 765 | 765 |
| J = | mm | 2083 | 2540 | 2819 | 3099 | 3378 | 3658 |
| K = | mm | 686 | 686 | 686 | 686 | 686 | 686 |
| L = | ~kg | 590/748 | 635/805 | 661/831 | 689/859 | 717/887 | 744/914 |
| A = | in | 4-1/2 | 4-1/2 | 4-1/2 | 4-1/2 | 4-1/2 | 4-1/2 |
| B = | in | 50-1/2 | 68-1/2 | 79-1/2 | 90-1/2 | 101-1/2 | 112-1/2 |
| D = | in | 13-3/4 | 13-3/4 | 13-3/4 | 13-3/4 | 13-3/4 | 13-3/4 |
| E = | in | 11-5/8 | 11-5/8 | 11-5/8 | 11-5/8 | 11-5/8 | 11-5/8 |
| F = | in | 11-1/2 | 11-1/2 | 11-1/2 | 11-1/2 | 11-1/2 | 11-1/2 |
| G = | in | 36 | 54 | 65 | 76 | 87 | 98 |
| H = | in | 49-1/8 | 49-1/8 | 49-1/8 | 49-1/8 | 49-1/8 | 49-1/8 |
| I = | in | 30-1/8 | 30-1/8 | 30-1/8 | 30-1/8 | 30-1/8 | 30-1/8 |
| J = | in | 82 | 100 | 111 | 122 | 133 | 144 |
| K = | in | 27 | 27 | 27 | 27 | 27 | 27 |
| L = | ~lb | 1300/1650 | 1400/1775 | 460/1835 | 1520/1895 | 1580/1955 | 1640/2015 |
| M = | RPM | 5-225 | 5-225 | 5-225 | 5-225 | 5-225 | 5-225 |
|
Electrical supply required 110-120V AC, 50-60 Hz single phase Note: Other electrical supplies can be accommodated at extra cost. |
|||||||
| EJ LATHE 114 mm (4-1/2") Bore | |||||
|
114 mm Spindle bore diameter 349 mm Radial clearance avove heat shiel 295 mm Radial clearance avove T-Slot FC |
|||||
| Model Number | B | Poly Drive | List Price | Coax Drive | List Price |
| EJ128 | 1281 | EJ12-111 | $57,750* | EJ12-211 | $63,990* |
| EJ174 | 1738 | EJ13-111 | $59,580* | EJ13-211 | $67,490* |
| EJ202 | 2018 | EJ14-111 | $61,950* | EJ14-212 | $70,990* |
| EJ230 | 2297 | EJ15-112 | $64,100* | EJ15-212 | $74,500* |
| EJ258 | 2576 | EJ16-112 | $66,200* | N/A | N/A |
| EJ286 | 2856 | EJ17-112 | $68,300* | N/A | N/A |
| B = Maximum length (Spindle nose to spindle nose) | |||||
| *Pricing is for raw lathe only (no Accessories.) Prices last verified on February 13, 2017 and are subject to change without notice! | |||||
| FIRECARRIAGE COVER AND COVER BURNER MOUNT OPTIONS (Required) | |
| Lathes can be purchased with a standard firecarriage cover and standard burner mount or with a T-slot firecarriage cover and/or a rack and pinion burner mount. The desired configuration must be specified. | |
| 9675 | Standard Firecarriage Cover and Burner Mount |
| 9589 | T-Slot Firecarriage Cover and Burner Mount |
| 9368-01 | Rack and Pinion Burner Mount |
| 9368-11 | Rack and Pinion Burner Mount and T-Slot Firecarriage Cover |
| VALVES, FOOT PEDAL MECHANISM, AND HAND LEVER MECHANISM |
|
| Rotary Cock gas-oxy proportioner, volume control and spindle air control |
|
| An optional Foot Pedal Stop Mechanism allows you to hold the fire control foot pedal at any desired position. It automatically releases when the foot pedal is pushed. | |
| 9869-01 | Valve and Foot Pedal Mechanism Assembly |
| 9869-02 | Valve and Foot Pedal Mechanism Assembly with Foot Pedal Stop Mechanism |
| 9869-03 | Valve and Hand Lever Mechanism Assembly |
| Piston Type gas-oxy proportioner, volume control valve | |
| 9059-03 | Small Proportioner Valve and Bracket |
| 9060-02 | Large Proportioner Valve and Bracket |
| Part Number |
Description |
Unit Price |
| 9869-01 | Valve & Foot Pedal Mechanism Assembly | $7,590* |
| 9869-02 | Valve & Foot Pedal Stop Mechanism | $8,295* |
| 9869-03 | Valve & Hand Lever Mechanism Assembly | $6,050* |
| 9059-03 | Small Proportioner Valve & Bracket | $2,620* |
| 9060-02 | Large Proportioner Valve & Bracket | $2,885* |
| *Pricing is for raw lathe only (no Accessories.) Prices last verified on February 13, 2017 and are subject to change without notice! | ||
| EJ LATHE CHUCK OPTIONS | ||
| Chuck measurements listed below reflect their potential based on the dimensions of the EJ Lathe. Maximum measurements for all chucks, regardless of the lathe on which they are used, are listed in section 3 of the catalog. For the following chucks: C=Clockwise Close, CC= Counter Clockwise Close. | ||
| Part # |
Description | Unit Price |
| 9274 | 1/32" to 1/2" Drill Chuck, 1mm - 13mm capacity | $635* |
| 9425 | 3/16" to 3/4" Drill Chuck, 5mm - 19mm capacity | $945* |
| 9433 | 3/16" to 1-1/32" Drill Chuck, 5mm - 26mm capacity | $1,325* |
| 90009-04 | 4" Bison Chuck, 32mm bore diameter, 0mm - 60mm capacity | $1,600* |
| 97121-04 | LSC032 Scroll Chuck C, 32mm bore diameter / 1 mm - 38mm capacity | $1,600* |
| 97122-04 | LSC032 Scroll Chuck CC, 32mm bore diameter / 1 mm - 38mm capacity | $1,600* |
| 97141-04 | LSC052 Scroll Chuck C, 52mm bore diameter / 1 mm - 65mm capacity | $2,600* |
| 97142-04 | LSC052 Scroll Chuck CC, 52mm bore diameter / 1 mm - 65mm capacity | $2,600* |
| 97023-04 | LSC080 Scroll Chuck C, 80mm bore diameter / 2-124 & 10-156mm capacity | $3,000* |
| 97024-04 | LSC080 Scroll Chuck CC, 80mm bore diameter / 2-124 & 10-156mm capacity | $3,000* |
| 97035-04 | LSC114 Scroll Chuck C, 114mm bore diameter / 2-175 & 48-225mm capacity | $3,400* |
| 97036-04 | LSC114 Scroll Chuck CC, 114mm bore diameter / 2-175 & 48-225mm capacity | $3,400* |
| 9781-54 | LAC033 Automatic Chuck, air actuated, 33mm bore diameter, requires 9796 or 9797 2-18 & 15-35mm capacity | $3,925* |
| 9779-54 | LAC050 Automatic Chuck, air actuated, 50mm bore diameter, requires 9796 or 9797 3-25 & 25-47mm capacity | $4,675* |
| 9796 | Foot Pedal actuating mechanism for air actuated chucking devices | N/A |
| 9797 | Hand valve actuating mechanism for air actuated chucking devices | N/A |
| 9899 | UC Universal Planetary 3-Jaw Chuck, 92mm bore diameter, 3mm - 298 mm capacity standard arm rods are 51mm in length | $2,550* |
| 4467 | 102mm arm rods for UC Chuck, order 3 each | N/A |
| 80481 | 102mm arm rod option for UC Chuck | N/A |
| 9962 | EC Universal Planetary 3-jaw Chuck, 114mm bore diameter, 25mm - 418mm capacity, standard rods are 114mm in length | $3,600* |
| 9969 | HSJ Universal Planetary 6-jaw Chuck, 114mm bore diameter 6mm-171mm inner jaw capacity, standard rods are 51mm in length 27mm-376mm outer jaw capacity, standard rods are 114mm in length | $5,350* |
| 1748 | 221mm arm rods for EC, HSJ Chucks, order 3 each | N/A |
| 80308 | 221mm arm rod option for EC, HSJ Chucks | N/A |
| 81026 | Donut Option for EC Chuck | N/A |
| 9894 | HSJ Guiding Chuck, 114mm bore diameter 6mm-134mm capacity (outboard spindle nose adaptor required 9333) | $1,800* |
| 9973 | 4601 Independant 4-jaw Chuck, 84mm bore diameter 146mm - 394mm capacity, 0mm - 241mm with jaws reversed | N/A |
| 80115 | Extended Jaw Set with Wrench for 4601 Chuck, 445mm - 617mm capacity | N/A |
| 80114 | Extended Jaw Option for 4601 Chuck | N/A |
| *Pricing is for raw lathe only (no Accessories.) Prices last verified on February 13, 2017 and are subject to change without notice! | ||
| DRAG BAR OPTIONS | ||
| Part Number |
Description | Unit Price |
| 9328-12 | Drag Bar, Model EJ128 | $6,715* |
| 9328-13 | Drag Bar, Model EJ174 | $6,765* |
| 9328-14 | Drag Bar, Model EJ202 | $6,815* |
| 9328-15 | Drag Bar, Model EJ230 | $6,865* |
|
*Pricing is for raw lathe only (no Accessories.) Prices last verified on February 13, 2017 and are subject to change without notice!
|
||
| MISCELLANEOUS ACCESSORIES | |
| Part Number |
Description |
| 9300 | Standard faceplate, 1 1/4" - 16 threads per inch |
| 9333 | Outboard spindle nose adaptor |
| 9628-04 | Swivel/Stop Mechanism |
| 1766 | Spindle closure disc |
| 9328-12 | Drag bar for MJ123 |
| 9328-13 | Drag bar for MJ169 |
| 9328-14 | Drag bar for MJ197 |
| 9008 | Roller bearing gib specify front or rear |
| 90066 | Foot Pedal Spindle On/Off Control |
| 90068 | Foot Pedal Spindle Speed Control |
| 9594 | Pyrometer Mount (tT-Slot Required) |
| 9310 | Optional faceplate, 1" - 16 threads per inch |
| 9807 | Spindle hose nipple |
| 9389 | Guide bar & bracket |
| 9328-15 | Drag bar for MJ225 |
| 9328-16 | Drag bar for MJ253 |
| 9328-17 | Drag bar for MJ281 |
| 9009B | Felt way wipers, set of four |
| 90067 | Remote motor control, Speed On/Off |
| 90052 | Foot Pedal Power On/Off Switch |
| SPECIAL ORDER ACCESSORIES | |
| COLLET SYSTEMS | |
| REDWOOD | |
| Part Number |
Description |
| 9244 | Unbored spindle nose collet |
| 9828 | Bored spindle nose collet, specify bore, 6mm - 86mm |
| 9268 | Collet protector disc faceplate |
| 2634 | Unbored protector disc |
| 9803 | Bored protector disc, specify bore, 102mm max |
| 9225 | Spindle nose collet draw-in bar assembly |
| 9234 | Collet draw-in bar assembly for outboard spindle nose adaptor |
| 1760 | 5-1/2" adaptor collet, unbored |
| 9404 | 5-1/2" adaptor collet, specify bore, 51mm - 137mm |
| 9413 | 5-1/2 adaptor assembly |
| STEMHEADS AND ACTUATING MECHANISM (headstock) | |
| 9988 | 2-jaw small |
| 9989 | 3-jaw small |
| 9990 | 4-jaw small |
| 9365 | Stemhead actuating mechanism (for use on headstock only) |
| 9995 | 2-jaw large |
| 9996 | 3-jaw large |
copyright © 2020