|EA LATHE 184mm (7-1/4") Bore|
Model ES Lathes have an infinitely variable timing belt drive with the following features: spindle On/Off, speed and direction controls: jog switch for spindles; and sockets which allow connection of remote control devices for control of spindle On/Off and speed functions. An optional tailstock spindle On/Off feature (co-ax) is available for certain models indicated below. The co-ax version of ESA 194 is limited to a maximum speed o 60RPM.
The spindle bore diameter of Model ESA Lathes is 184mm. The six different models of ESA Lathes represent six different bed lengths. Lathes can be purchased with motorized firecarriage and tailstock; additional sheets for motorized versions are available upon request. Lathe bed scales are a standard feature.
Accessories must be ordered separately. Additional information on individual accessories which are listed can be obtained under each accessorys respective catalog listing. For information on burners and paddles, refer to the Burner section of the catalog.
|A =||Spindle bore diameter|
|B =||Maximum spindle nose to spindle nose distance|
|D =||Radial clearance above heat shield|
|E =||Raidal clearance above T-slot firecarriage cover|
|F =||Length of spindle|
|G =||Firecarriage travel distance|
|H =||Overall Height|
|I =||Height-Floor to ways|
|J =||Overall Length|
|K =||Overall Width|
|L =||Weight/Shipping weight|
|M =||Spindle Speed Range|
|ESA 120||ESA 166||ESA 194||ESA 222||ESA 250||ESA 278|